LNK362-364 Product Highlights
Optimized for Lowest System Cost
• Proprietary IC trimming and transformer construction
techniques enable Clampless™ designs with LNK362
for lower system cost, component count and higher
effi ciency
• Fully integrated auto-restart for short circuit and
open loop protection
• Self-biased supply – saves transformer auxiliary winding
and associated bias supply components
• Frequency jittering greatly reduces EMI
• Meets HV creepage requirements between DRAIN and
all other pins both on the PCB and at the package
• Lowest component count switcher solution
Features Superior to Linear/RCC
• Accurate hysteretic thermal shutdown protection –
automatic recovery improves fi eld reliability
• Universal input range allows worldwide operation
• Simple ON/OFF control, no loop compensation needed
• Eliminates bias winding – simpler, lower cost
transformer
• Very low component count – higher reliability and single
side printed circuit board
• Auto-restart reduces delivered power by 95% during
short circuit and open loop fault conditions
• High bandwidth provides fast turn-on with no overshoot
and excellent transient load response
Notes:
1. Minimum continuous power in a typical non-ventilated enclosed
adapter measured at 50 °C ambient.
2. Minimum practical continuous power in an open frame design
with adequate heat sinking, measured at 50 °C ambient.
3. Packages: P: DIP-8B, G: SMD-8B, D: SO-8C. Please see Part
Ordering Information.
4. See Key Application Considerations section for complete description
of assumptions.
and operating power are derived directly from the DRAIN
pin, eliminating the need for a bias winding and associated
circuitry.
